How to Skip or Block Hulu Ads Easily 2020 (3 Working Ways) – 10 minute mail

In Short Hacks: Do you love watching movies on Hulu? Then definitely you must be aware of Hulu, which is an online streaming service for Shows, Movies, TV series, etc. Hulu allows you to stream your favorite movies with fewer stuff ads or no interruption of ads. But wait many of our readers was keep asking about How Can they skip Hulu Ads or Block these annoying ads. So In this article, we have mentioned some easy ways to skip Hulu ads.

How to Skip or Block Hulu Ads Easily 2019?
How to Skip or Block Hulu Ads Easily 2020?

Hulu is a subscription-based entertainment website. Here, you can stream a number of Shows, Movies, TV series, etc. It provides its services across the United States. It was founded on October 29, 2007, and is owned by The Walt Disney Company and Comcast. There are many hulu spotify discounts for the students that they can access from their official page.

If you are a subscriber to Hulu’s basic plan, you will frequently come across specific ads at the beginning of streaming your movies or TV shows on Hulu. You will also find ads at certain places while streaming. Even though the ads are fewer than those on television sets, you might feel the need to eliminate these ads once and for all.

There are several methods that you can use to skip Hulu ads. Below, we have listed some of the best methods which you can use to skip Hulu ads.

Also Read: Free Working Hulu Premium Accounts


#1 Ad-Block Plus:Top 5+ Pop-Up AdBlocker's For Android | Ban Annoying Ads

You can make use of Ad-Block Plus on your browser to skip the ads displayed by Hulu. This method works for most of the ads by replacing the ads with a blank screen. The only drawback of this ad-blocker is that it might not be able to skip a few ads.

If this ad-blocker fails to skip or block ads displayed by Hulu, try using some other ad-blockers such are available in the market.

Also Read: How Many People Can Stream Hulu Account at Once?

#2 Open Hulu Video on Two Tabs:

Step 1- Open Hulu on your web browser and select any movie or TV show you wish to stream.

Step 2- Now, open the same program on a new tab of the same browser.

Step 3- Then, mute the volume on the 2nd tab, and fast forward to a few seconds before the first ad. You can identify the ads, as they are marked with a different color on the stream bar.

Step 4- Navigate back to the 1st tab and start streaming your video on the 1st tab.

Step 5- Keep watching till the 1st commercial ad in the 1st tab, go to the second tab and un-mute the volume and continue watching the program there.

Just repeat this trick between two instances and watch the full program without interruption.

Also Read: Top 5 Best Hulu Shows & Series To Watch Now!

#3 Reload Hulu page frequently:

Hulu is a media streaming website that has a revenue stream system. It works based on subscriptions and commercial ads. But, watching 0 to 4 minutes of advertisements between the program is quite annoying, and it ruins the experience completely of the program.

Whenever you come across a long-duration ad, simply refresh your streaming tab. Once the page has been successfully reloaded, you will notice only two short ads.

Then, your program will resume from the same point of reloading your page. Using this method, you can easily skip long ads, which are a duration between 3 to 4 minutes. And thus, it replaces the long ads with shorter ads of 30 seconds.

Also Read: Netflix vs Hulu: Which is better?

Conclusion:

This is all you need to know about the methods which you can use to skip Hulu ads while streaming your favorite video on it! You can try them out, and you will not be disappointed.

If we have missed out on any such useful method to skip Hulu ads, then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

3 Ways To “Fix Network Protocol Error” Mozilla Firefox (2020) – 10 minute mail

Mozilla Firefox, also known as Firefox, is a web browser. It is compatible with a number of operating systems such as Android, Windows, Linux, iOS, FreeBSD, OpenBSD, NetBSD, illumos, and Solaris Unix. While using this web browser, you might come across an error known as ‘Network Protocol Error’ on Firefox. Once you encounter this error, you cannot use Firefox without fixing it. Below, we have discussed this error and some methods, using which you can fix the ‘Network Protocol Error’ on your Firefox web browser.

Fix Network Protocol Error on Mozilla Firefox
Fix Network Protocol Error on Mozilla Firefox | itechhacks

What is Network Protocol Error?


This error occurs due to the accumulation of cache memory of your Mozilla Firefox web browser.

What is Network Protocol Error on Mozilla Firefox - itechhacks
What is Network Protocol Error on Mozilla Firefox

Some users might notice ‘Corrupted Content Error‘ this message instead of ‘Network Protocol Error’ on your Firefox browser. However, both these errors are caused due to the same issue and can be fixed using similar methods.

READ MORE: How To Fix “Unfortunately TouchWiz has stopped” Error


Method 1: Reload your Webpage.

Before making any advanced changes in your browser, try solving this error by reloading your Webpage, while bypassing the cache.

You can do this by using the ‘Ctrl + F5‘ or ‘Ctrl + Shift + R‘ keys. In doing so, your webpage will be refreshed from the server and the ‘Network Protocol Error’ should be fixed.

If the error is not fixed by using this method, go ahead with the method listed below.

Method 2: Clear Firefox cache memory.

To clear the cache memory of your Firefox web browser, follow the steps listed below.

Step 1- In your Firefox web browser, go to the Preferences window.

or You can enter about:preferences#privacy in the URL bar.

How To Fix Network Protocol Error on Mozilla Firefox

Step 2- Here, open the Privacy & Security tab from the options available on the left of this window.

Step 3- You will find a ‘Clear Data‘ option in the ‘Cookies and Site Data‘ section. Click on it.How To Fix Network Protocol Error on Mozilla Firefox

Step 4- A pop-up will appear on your screen, with two options. Namely, ‘Cookies and Site Data‘ and ‘Cached Web Content‘. Select both these options and click on the ‘Clear‘ option.

Step 5- Now, close your Firefox web browser and restart it on your device.Fix Network Protocol Error itechhacks

Note: Once you clear all the cookies and site data, you might get signed out of all the websites you are logged in through Firefox. However, you can easily log in to those websites via Firefox, as the ‘Network Protocol Error’ will be fixed.

READ MORE: How To Fix Windows 10 Taskbar Not Working

Conclusion:

This is all you need to know about the Network Protocol Error of Mozilla Firefox, and how you can fix it by following some simple steps. If you know of any better method to fix the ‘Network Protocol Error‘ on Mozilla Firefox, then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

‘This Copy of Windows is not Genuine’ 4 Methods to Fix Error 2020? – 10 minute mail

In Short Hacks: This Copy of Windows is not Genuine?? Are you also facing the same error? Windows is still one of the most and majorly used operating system around the world and getting such Pop-Ups right on your screen feels so annoying and disturbing. So to Permanently solve and Fix such erros – This Copy of Windows is not Genuine. here we have listed out some best working ways and methods that will surely fix copy of windows error in 2020.

How To Fix
How To Fix “This Copy of Windows is not Genuine”

Fix This Copy of Windows is not Genuine: Windows is a widely used operating system around the world. Each Windows devices have a unique copy of Windows which is activated using a unique activation code. However, not everyone uses an authentic copy of Windows. There are quite a few people who make use of pirated Windows 10 OS on their PC/laptop. This is because the pirated copies cost a lot cheaper than the original copy of Windows. However, the features and functionality of Windows remain the same.

You will find no glitches or any point of difference between the original and the pirated copy. But, there is an error which appears on your screen once you have used the pirated copy for some time. A message saying ‘this copy of Windows is not genuine’ will appear on your screen and your background will change to a black screen.

This error has no connection with the functionality of the OS. Hence, solving this error is very simple. We have mentioned and explained each step in complete detail. Read this guide thoroughly once, before executing them on your PC/laptop.

Also Read: How To Fix 100% Disk Usage In Microsoft Windows 10?


Method #1: Fix This Copy of Windows is not Genuine by Uninstall Update KB971033

Since your OS is showing the ‘this copy of Windows is not genuine’ error, it means that there is a file in your system which can detect your pirated Windows OS. Thus, you need to search and uninstall the updated file which is causing this error. If you do not find the file by using the steps mentioned below, proceed to go the next step.

1. Launch ‘Control Panel.’

2. Navigate to Windows Update Section.

3. Here, click on view installed updates to see all the updated files.

4. Now, search for the ‘KB971033‘ update in the list and uninstall it.

If you do not find the file, move on to the next step.

Method #2: Fix This Copy of Windows is not Genuine by CMD Tricks

Now, follow the steps listed below to fix the error on your PC/laptop.

#1. Click on the ‘Start‘ button and type ‘cmd‘ in the search box and hit ‘Enter.’

#2. Now, right-click on the ‘Command prompt‘ option and select ‘Run as Administrator’ from the drop-down box.

#3. Then, type SLMGR -REARM and hit ‘Enter.’ SLMGR is the tool which operates Windows software license and REARM is the command used to resets license status of Windows.

#4. Now, click on ‘OK‘ to save the changes and then, restart your PC/laptop.

On executing the above steps, you will never notice ‘this copy of Windows is not genuine‘ error again. However, if this step doesn’t help, you can try using SLMGR /REARM where you had used SLMGR -REARM in the command prompt.

Also Read: Top 5 Best Screen Recording Software or Apps for Windows

Method #3: Fix This Copy of Windows is not Genuine Permanently

 Fix This Copy of Windows is not Genuine Permanently 2019
Fix This Copy of Windows is not Genuine Permanently

Since you do not have the original copy of the Windows OS, you must not receive its updates. We had uninstalled an update in the first step, and if you do not turn off the updates, the files will get updated, and you will notice the same error all over again. Execute the following steps to turn off the updates to your Windows OS.

#1. In the Control panel, click on System and Security >> Windows update.

#2. Here, click on ‘Turn automatic updating on or off’ which you will find under ‘Windows Update’ option.

#3. Now, you will notice a drop-down box under the ‘Important updates’ section. Here, select ‘Never check for updates’ to turn off the updates for your Windows OS.

#4. Finally, click on ‘OK‘ to save and apply the changes which you have made.

These are the steps using which you can solve ‘this copy of Windows is not genuine’ error on your PC/laptop. If your background is still a black screen, head over to background settings and changes the background theme. However, you will no longer be getting the updates for your OS. But, you can revert the last step and receive the updates again.

Also Read: Best Windows 10 Themes/Skins To Change Your Windows Look

Conclusion:

Well, That’s it on our end. These were some of the best all-time Working techniques used to FIX and solve this copy of windows 10 or windows 7 is not genuine. If you have any queries regarding the steps involved in solvingthis copy of Windows is not genuine 2020 error on your PC/laptop, then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

How To Check & See Purchase History in Steam (2020) – 10 minute mail

See Purchase History in Steam: Most of the gamers would be familiar with Steam and they must have used it on several occasions to purchase games and to use its community features. Here we have published two ways to view purchase history in steam.

How To Check & See Purchase History in Steam
How To Check & See Purchase History in Steam | itechhacks

For those who are not familiar with Steam, it is a video game digital distribution platform developed by Valve. It provides its users with features such as digital rights management, video streaming, social networking services, etc.

Most people do not keep track of the money they spend on purchasing games and in-game purchases using Steam. However, Steam keeps track of each and every activity of every account. Thus, you can easily view your purchase history on it.

READ MORE: How To Fix Steam Store Not Loading 2020

What information is maintained by Steam?


Your purchase history on Steam contains the exact date of purchase, an item section which lists all the items purchased, and the total amount you have added and used in your Steam wallet.

How can Steam purchase history be useful?


You can use your Steam purchase history as a proof of purchase in case you face difficulty after paying for a game or any other feature.

You can use it to know if you have been overcharged and as proof if you are eligible for a refund.

Thus, here we are with a guide that you can use to view your Steam purchase history.

How to View Steam Purchase History


Before you go ahead with this method, you must have a Steam account and you should have made some purchases through it.

You can follow this method even if you have not made any purchase. But, you will not find any history in doing so.

Step 1- Launch a web browser on your device and go to this ‘https://store.steampowered.com/about‘ link.

Step 2- Login to your Steam account by entering the login details.

Step 3- Then, click on your profile located at the top-right corner of your Home page.

Step 4- From the options which appear on your screen, click on the ‘Account Details‘ option.

Step 5- Your wallet information will be displayed on your screen. Here, click on ‘View Purchase History‘ option.How To Check & See Purchase History in Steam

On a new page, a list with all your purchase details will appear on your screen. You can use it to assess every purchase you have made on Steam through your account.

Further, you can click on each one of your purchases to view more details about them.

READ MORE: Verystream Not Working – How To Download VeryStream?

Conclusion:

This is how you can view your purchase history on Steam and keep track of all your purchases. The process is quite simple but new. You can start with the first method and keep executing the following methods until view purchase history in steam resolved. If you have any queries regarding this topic, then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

(Working) Fix “Unfortunately TouchWiz has stopped” Samsung S5 – 10 minute mail

In Short Hacks: The most common problem which occurs in Samsung mobile phones and tablets is the problem of Touchwiz Home. Most of them get this error which says “Touchwiz Home Has Stopped”. Now, the question arises How to fit it? However, so many of them don’t know the solution to it. So, if you are also one of them who got this error and want to solve it, then you have come to the right place. Read the full article and resolve the issue on your device.

How To Fix “Unfortunately TouchWiz has stopped” Error 2019
How To Fix “Unfortunately TouchWiz has stopped” Error

Touchwiz Interface is developed by Samsung for only Samsung smartphones and tablets. It is not an Operating system; actually, it is a full-featured touch user interface. All those mobile phones, tablets that run Touchwiz are running on Android, Bada, Symbian or even a Windows Mobile. There are so many Samsung device users who face the Touchwiz error problem. When the error comes, it shows “Unfortunately, Touchwiz Home Has Stopped” message on the screen. And this error freezes your device so you need to restart your device and there is no other option.

Now, the main problem comes when the Touchwiz error does not go, and it appears again and again. Now, what is the solution for that? The reason for this error can be an issue or bugs. And there are different solutions available to solve the error. So, check out the methods by which you can fix the issue “Touchwiz Home has stopped”. Use the given process and solve the problem.

Unfortunately Touchwiz Home Has Stopped
Unfortunately Touchwiz Home Has Stopped

Also Read: How To Fix Netflix Error Code NW-2-5 Easily?


Method #1: Clear Cache And Data Of The App

This method will be deleting all the cache and data for Touchwiz Home app. By doing this, you might solve the problem if somewhere the issue is in the files or data. Follow the given steps and clear the cache and data of the app.

  • First, you need to switch off your device as we need to boot it in a safe mode
  • Press the key of Volume down when the device is booting when it turns ON
  • As the bootup process is done, release the volume down key.
  • At the bottom of the left side, there is a notification for Safe MODE
  • Now, Go To Settings > App Manager > All applications
  • There in the list, you will see Touchwiz Home at the end
  • Tap on the app and open it
  • There Wipe out all the cache and data of the app by clicking “Clear Cache” and Clear Data
  • Reboot the device

In most of the devices, these simple solution works, but even after using this method, you could not solve your problem then try out the next method.

Also Read: How To Fix Yellow Display Tint Issues In Windows Laptops?

Method #2: Soft Reset Your Device

One of the main thing you need to do is Soft reset your device and solve the error. If the TouchWiz error has occurred on Samsung Galaxy S5 for the first time, then there can be a problem in the firmware or in the TouchWiz system. So, just simply soft reset can solve your problem.

Follow the steps and Soft reset your device:

  • While your phone is on, remove the battery from your device
  • Press the Power Button for at least 30 seconds
  • Place the battery in the phone
  • Now turn On your Phone.

This method helps you to reset your phone’s memory and help you out to solve the error.

However, if the problem is not solved still, then you need to Factory reset your device.

Also Read: Fix BOOTMGR is Missing Windows 7, 8, 10 (6-Methods)

Method #3: Factory Reset Your Device

However, when you try this method, do not forget to take the backup of your important data. If you don’t know how to make Backup, then follow the given steps and first take the backup of your device and then do the factory reset.

One of the best and normal ways is to make use of Samsung own Kies Software which is normally used to update the software of Samsung devices.

Now, follow the steps to take Backup of the device with the help of Google Account.

  • Go to Settings of your device
  • Open General > Backup and Reset
  • Here you will get two options Back Up my Data and Automatic Restores.
  • Choose the option by ticking on the checkbox
  • This will take the backup details like Wifi password, App data, and Google settings

Another method to take backup is using the Samsung Account.

  • Go to Application> Settings > User and backup > Account (make sure there is a Samsung account Signed in)
  • If the option is On then it will sync the contacts, calendar

Once you have taken backup then go to Factory reset. Check out the steps to factory reset your device.

  • First of all Switch Off your device
  • Now, Hold the Power, Home, and Volume Up button together for a few seconds until the Android logo shows up on the screen, now release the button
  • for highlighting any option use Volume down button
  • Confirm any option using Power key
  • Highlight the factory reset option by using the volume key and confirm it by a power button
  • Now, select “Delete all user data” and confirm
  • Wait until you see the “Reboot system now” option and select it
  • Your device will restart, and you need to set up your device again

Also Read: How To Fix WiFi Connected But No Internet Access?

CONCLUSION

So, these are some of the methods by which you can solve the “Unfortunately, TouchWiz home has stopped” Error 2020. If you are also getting this error on your Samsung device, then try out any method given above. If you find this article helpful, share this article with all your friends and family. It will help us to grow bigger than ever. Also, if you have any other queries or suggestions in this article, do let us know in the comment section. We are always open to your article recommendations so feel free to suggest some topics. Thanks a lot for reading. Cheers! 🙂

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

How To Fix Netflix Error Code NW-3-6 (Working Guide) – 10 minute mail

Netflix error code NW-3-6 is the most common error which is faced by many users. Mostly, this error occurs when the network configuration blocks the device from accessing the Netflix app.

How To Fix Netflix Error Code NW-3-6
How To Fix Netflix Error Code NW-3-6

What Causes Netflix Error Code NW-3-6?

There is no specific cause identified about this error. However, many other factors might cause this error. Check out the following factors:

Configuration Problems

This error can come if the configuration problem is with your local ISP or the device which might get interrupted from connecting to Netflix.

Internet Connection Problems

Error code NW-3-6 can also occur if there is a connectivity problem with your internet network.

READ MORE: How To Fix Netflix Error Code NW-2-5 Easily

Now, let us check out how to fix Netflix Error NW-3-6 error.

How To Fix Netflix Error Code NW-3-6

Solve the error by following the given methods.

Method 1: Check your Internet Connection

If you are getting error NW-3-6, then make sure your internet connection is proper. If your internet is not proper then also you might get this error to your Netflix account. You can connect a device to the router with the help of Ethernet cable. Follow the steps to connect the device to the router:

  • First, turn off the device in which you stream Netflix
  • Now, connect the device to the modem with Ethernet cable
  • Once you connect, turn on the streaming device and try to stream Netflix again.

READ MORE: How To Watch Netflix for Free in Quarantine

Method 2: Restart Your Internet

Sometimes, due to your modem also you can get an internet problem, and because of that, it will show this error. Fix this problem by restarting your internet through your router.

Follow the steps to restart the internet:

  • First, unplug your router from the power source
  • Wait for a few minutes, about 4 to 5 minutes
  • Again plugin back the router
  • Now start your device it is streaming or not.

Method 3: Set IP address to static for Smart TV

If the internet connection is not stable between the modem or a router, then your device might get Netflix error NW-3-6. So, try to reset the IP address to static and resolve the error.

Follow the given steps and solve the error:

  • First, Go to SETTINGS
  • Then go to NETWORK and then NETWORK STATUS
  • Save the picture of the “IP Address“, “Subent” and Gateway
  • Go back to NETWORK
  • Tap on “Set Network On Manual
  • Enter the information which is copied or took a picture

Method 4: Refresh hardware

If your device is ON for a long time then also you might get this error. So, turn off the device for a few minutes and then turn it ON again. Refreshing your device might clear the memory.

Check if your WiFi signal is strong or not. If it is strong and you are getting the error then use LAN port on the device.

If you have an Ethernet cable, then try to use it. If still the error is there then try another LAN port or WiFi. If you do this and the error is solved, then you are having a problem with the Ethernet port between your router and the device.

READ MORE: How To Get Netflix Subscription for free.

Final Thoughts

So, follow the above-given steps to solve Netflix Error NW-3-6. Try out these methods and resolve the error quickly. If you are unable to solve the error with these given methods, then you need to contact the customer support team and get the solution to resolve the error.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

3 Proven Ways To Fix Steam Store Not Loading Issue (2020) – 10 minute mail

In Short Hacks: There are many steam users who complain about their Steam store page not loading. If you are also getting the same error, then you can fix it. But do you know how to fix Steam Store Not Loading? If no, then check out this article and solve this problem. There are a few ways to solve this problem.

3 Proven Ways To Fix Steam Store Not Loading Issue (2020)
Ways To Fix Steam Store Not Loading Issue | itechhacks

Do you know the reasons for Steam Store Not loading error? There are different reasons which can cause this error. The first reason is your Internet connection might be slow, or there can be corrupted web browser cache and much more. When you get the Steam not loading issue, then do not worry. Here in this article, you will get the solution to this error. Let us check out how to Fix Steam Store Not Loading error.

Also Read: How To Fix Netflix Error Code NW-2-5 Easily


Check out the different methods and solve the issue.

Method 1: Fix Steam Not Loading by Clearing HTML Cache

HTML cache can be a problem to the Steam store not loading. You must clear HTML cache in the Steam. Follow the steps given below and clear HTML cache and solve the Steam store not loading problem.

Follow the steps and clear HTML Cache.

  • In Windows 10 go to search box open Folder option or File Explorer options and open it
  • Click on “Tab” and choose Show Hidden files, folders and drives
  • Click on Apply and OK to allow the changes done.
  • Now, press Windows (key) + R on the keyboard and open Run dialogue box.
  • Now enter in the Run Box, C:UsersAppDataLocalSteamhtmlcache 
  • Replace the with your windows account username.
  • In this folder, select all items and choose Delete to delete all.
  • Again press Windows + R and open Run Dialogue box again
  • Type steam://flushconfig in the box and hit Enter.
  • Now, a new window will come up, and it will clear your local download cache
  • After this, you need to log in again to Steam by entering your username and password
  • Click on OK

Once you re-login to steam and the steam store not loading problem will be fixed.

Also Read: How to Fix Discord Awaiting Endpoint Error (Guide)

Method 2: Clear Steam Web Browser Cache

If your web browser’ cache has corrupted Steam then also the Steam store not loading problem arises. If your web browser cache is corrupted, then the store cannot load. If this is the problem, then you can fix the Steam store problem by deleting the web browser cache.

Follow the steps and delete the Web Browser cache.

  • First Launch steam client
  • Now, click on Steam tab which is at the top left side
  • Select Settings from the drop-down menu
  • Choose Web Browser
  • Now, click on Delete Web Browser cache
  • Delete the Web Browser cookies
  • When a window pops up to confirm click ok and delete the browser.

Also Read: How To Fix PUBG “Servers Are Too Busy” Error

Method 3: Update Steam

Update your system is the best way to fix the Steam store, not loading problem. If you are getting this error, then you can try this method to fix the error.

  • Do right click on the Windows taskbar and choose task manager from the menu
  • If you want, you can use shortcut Ctrl+Shift+Esc to open Task Manager.
  • Now, click on Steam Client BootStrapper (32bit) and click on End task
  • Do right click on Start Menu and choose Run and open the Run Box
  • If you want you can also use the shortcut by pressing Windows + R and open Run box
  • Copy and paste C:Program Files (x86)Steam to the Run box and press Enter.
  • Now, delete all folders except steamapps folder, user data folder, Skins folder, Steam.exe file and SSFN files.
  • To launch it, click on the Steam desktop shortcut
  • It will update automatically
  • Once it is updated, you can log in to Steam and see the Steam store not loading issue is solved.

Also Read: How To Fix Windows 10 Taskbar Not Working 2020

Final Words

These are the various methods that you can use to Fix Steam Store Not Loading Issues of 2020 on your streaming device. We have also provided the steps involved in each of the methods. You can start with the first method and keep executing the following methods until the Fix Steam Store Not Loading resolved. If you have any queries regarding this topic, then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

4 Practical Ways To Fix Windows 10 Taskbar Not Working 2020 – 10 minute mail

In Short Hacks: Are you Windows 10 User and facing the Windows 10 Taskbar Not working issues? Relax! You are landed at right article. In this post, we have mentioned 4 working ways and methods by which you can fix this error permanently on your Windows 10 PC or Laptop.

How To Fix
How To Fix “Windows 10 Taskbar Not Working”?

Microsoft Windows is one of the widely used operating systems for PCs in the world! The latest update rolled out by Microsoft is the Windows 10. This operating system contains all the modern features and provides with an exceptional user experience. However, there might be a few instances, where a glitch or issue might occur.

One such error faced by some of the Windows 10 users is the non-functionality of the taskbar. The taskbar is one of the most useful things while operating on any Windows version. You can find all the running applications displayed on the taskbar, pin some of the most frequently visited applications, etc. Thus, the typical functioning of the taskbar is profoundly required. We have listed some of the methods which you can use to fix the taskbar not working issue on your Windows 10. In an earlier article, we have posted a brief article on How to fix 100% Disk Usage in Windows 10 that also got a huge response.


Using any of the given Methods will solve the Windows 10 Taskbar Not Working in 2020

Method 1: Fix Windows 10 Taskbar not Working by Restarting your PC.

One reason for your taskbar to not work normally is due to some error occurred while starting your PC. Once you restart your PC, it will soft reset your PC, and once it is restarted, your taskbar of Windows 10 might begin to function as usual.

If your taskbar remains non-functional even after restarting your PC, try executing the method listed below.

Also Read: How To Fix “This Copy of Windows is not Genuine”

Method 2: Re-registering the Taskbar

In this method, we will be using the Windows Powershell, which is a command-line tool used to configure system settings and automate Windows tasks. However, you must create a Restore Point before you go ahead with this method. The steps to be executed in this method are listed below.

Step 1- Search for ‘Windows Powershell‘ on your PC and Run it as administrator and then, select ‘Yes’ on the window which pops-up on your screen.

Windows 10 taskbar not working fix solved
Powershell

Step 2- Once the Powershell window opens on your screen, copy and paste the command mentioned below in it and hit Enter.

Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml”}Windows 10 taskbar not working fix solved

Step 3- When the command gets successfully executed on your PC, navigate to your Explorer >> C: >> Users >> name >> AppData >>Local.

Step 4- Here, search for a file with the name ‘TileDataLayer‘ in the list. Once found, delete it.

Step 5- If you are unable to delete this file, open the Services Manager by running services.msc on your PC. Here, search for ‘Tile Data model‘ server service and stop it.

Step 6- Once you have stopped it, try deleting the file again.

Now, the file should be deleted and your issue of the taskbar not working should be fixed.

Also Read: Windows 10 Tricks, Tips & Hacks  – Performance Tweaks

Method 3: Restart your Windows Explorer.

If the above methods fail to solve your issue of taskbar not working, try executing the steps listed below. This method temporarily stops all the processes of Windows Explorer and helps in solving the taskbar not working issue. The steps included in this method are listed below.

Step 1- Press the Windows Key and ‘R‘ on your keyboard simultaneously. This will bring up the ‘Run‘ prompt on your PC.

Step 2- Here, enter ‘taskmgr.exe‘ and press Enter to launch the ‘Task Manager‘ on your PC.

Windows 10 taskbar not working fix solved
Task Manager

Step 3- Now, search for Windows Explorer in the list of all the processes running on your PC. Select it and click on the ‘Restart‘ option.

Once you execute the steps listed above, your taskbar should start functioning as usual.

Method 4: Look for faulty explorer add-ons.

If none of the above methods prove to be useful, try looking for a faulty File Explorer add-on which might be interfering with the functioning of explorer.exe and disable or remove them completely.

Also Read: How To Fix Unfortunately Messenger Has Stopped Error?

Video Tutorial to Fix Windows 10 Taskbar Not Working (2020)

Conclusion:

You can use any one of the methods listed above to fix Windows 10 taskbar not working issue on your PC. Do let us know of the method which helped you in solving this error on your Windows 10 PC in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

How To Disable Microsoft Compatibility Telemetry (Working 2019) – 10 minute mail

In Short Hacks: Now You can easily Disable Microsoft Compatibility Telemetry in Windows 7/8/10. But, Before Disabling any such function on Windows. We should be aware of each and every aspects of this Function (Microsoft Compatibility Telemetry). This article we will try to clear your doubts like: Should You Disable Windows 10 Telemetry? Microsoft Compatibility Telemetry High Disk Usage Fix in 2019

How To Disable Microsoft Compatibility Telemetry Windows 7/8/10
Disable Microsoft Compatibility Telemetry Windows

Microsoft is one of the most revolutionary companies ever formed in the world! Without Microsoft, it is difficult to visualize mankind’s progress. This is due to its groundbreaking inventions. One of the most useful invention of Microsoft its Windows operating system. This operating system is used by the majority of their population. Without this operating system, a computer is of no use!

Since 1985, many updated versions of Windows have been rolled out from time to time! Windows 10 is its latest and the one with most of the features. One such feature which has been added to Windows 10 is its telemetry service. The function of this service is to collect the user data and transmit it to Microsoft so that the data can be analyzed and any kind of issue can be detected and fixed!

Also Read: Windows 7 ISO Free Full Version Download 32 or 64 Bit 2019

This is the latest service added in the Windows 10 operating system. This service collects various information such as diagnostics information, your frequency of used features and applications, system files, etc. The permission to share data with Microsoft can be edited but cannot be turned off completely! You will find four tiers of telemetry settings which are-

#1. Basic: Allows basic information such as device information, etc.

#2. Security: Your security-related details can be shared.

#3. Enhanced: Here, both basic and security data can be sent to Microsoft.

#4. Full: In this category, there is no restriction and any information from your computer can be transmitted to Microsoft.


There are some people who find this service to be a threat to their privacy in which there are some who do not wish to share their data with anyone. For such people, here we are with some of the methods which you can use to turn off the telemetry service on your Windows PC.

Since there is no direct option provided by Microsoft, you need to execute a number if steps in a given order. So go ahead and start executing the steps listed below.

Also Read: Best Windows 10 Themes To Change Your Windows Look

Method #1: Use Registry Editor.


Step 1- Press the Windows key and R from your keyboard simultaneously and type ‘regedit‘ in the dialog box and hit ENTER.

Step 2- Head over to HKEY_LOCAL_MACHINE >> SOFTWARE >> Policies >> Microsoft >> Windows >> DataCollection.

Step 3- Now, right-click on DataCollection and choose New >> DWORD (32-bit) Value. Then name the new value Allow Telemetry then double-click Allow Telemetry and set its value to zero (0) and click on OK.How To Disable Microsoft Compatibility Telemetry Windows 7/8/10

Using this method, the telemetry service will be disabled and your information will remain untouched. Still, if you are unable to disable telemetry service, you can go to the next method.

Method #2: By Group Policy Editor.


Step 1- Hold the Windows key and R from your keyboard simultaneously and type ‘gpedit.msc‘ in the dialog box and hit ENTER.

Step 2- Go to Computer Configuration >> Administrative Templates >> Windows Components >> Data Collection and Preview Builds. And then, double-click on ‘Allow Telemetry,‘ select ‘Disabled‘ and then click ‘OK.’

You can launch your task manager to check if the service has been terminated. If not, try using the next method.

Also Read: How To Fix “Windows 10 Taskbar Not Working”?

Conclusion:

These were some of the best working methods which you can use to disable Microsoft Compatibility Telemetry services on your Windows 10. However, there is no direct option to completely disable telemetry services on Windows 10. But, you can turn off the telemetry services by using any of the methods listed above. Also, this is all you need to know about the all new telemetry services and what are its functions.

If you know if any better method or if you have any queries in the methods listed above then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.

5 Working Methods to Fix Netflix NW-2-5 Error (2020) – 10 minute mail

In Short Hacks: Netflix has encountered an error. Retrying in 10 seconds? Getting this error? Asking stupidly but yes that’s why you landed in this article. Trust me we won’t disappoint you. Anyway, Netflix is a media streaming website, which was founded in the year 1997. As of now, it has millions of users all around the world! So let’s start with the Possible Fix of Netflix Error Code NW-2-5 in 2020.

How To Fix Netflix Error Code NW-2-5 Easily?
How To Fix Netflix Error Code NW-2-5 Easily?

Due to its massive audience, people come across various issues while streaming their favorite TV shows or movies on it.

Out of several errors, Netflix NW-2-5 Error is one of the most frequently faced issues by the people.

The Netflix NW-2-5 Error Code is an indication of the poor network connectivity of the device on which you are streaming your Netflix videos. Due to this poor connectivity, your device is unable to access the Netflix servers.

This error can be caused due to several reasons such as defect on your streaming device, poor internet connectivity, etc.

Thus, here we have discussed all the possible causes for the Netflix nw-2-5 Error Code and have also provided with their solutions.

Also Read: How To Watch Netflix Together from Remote Distance Online


Fix Netflix NW-2-5 Error Code
Netflix NW-2-5 Error Code

Since this error code indicates the internet connectivity issue, you can start troubleshooting with some basic methods and then go ahead with the advanced techniques to resolve this issue on Netflix.

Method 1: Check your streaming device.

The first thing you must check is whether your streaming device is connected to your internet service. You can check if both the ends of the wires are correctly connected. If you have a wireless connection, you can access the settings of your streaming device to check its connectivity.

Method 2: Check your internet service.

Once you ensure that your streaming device is connected to your internet service, check internet connectivity. You can do it by running another web-based application on your streaming device.

If there is a lack of internet connectivity, try restarting all the devices, which include your router/modem, your streaming device, and if the internet is still not restored, contact your internet service provider to resolve the issue.

Also, check if your streaming device is allowed to use the internet connection to stream videos on Netflix. In some cases, the network you are using does not support streaming websites.

Method 3: Try strengthening the internet connection.

If you have a wireless connection between your streaming device and your router/modem, try establishing a wired Ethernet connection between them. Or, you can try reducing the distance/obstructions between your wireless modem/router and your streaming device.

Method 4: Verify Your DNS Settings.

By verifying the DNS settings, you can resolve the Netflix nw-2-5 Error Code.

Follow the steps listed below to Fix Netflix NW 2-5 in PlayStation 3:

Step 1- On your PlayStation 3, go to Settings.

Step 2- Here, go to Network Settings and select Internet Connection Settings.

Step 3- When a confirmation screen appears, click on, OK.

Step 4- Then, select Custom from the list of options available for you.

Step 5- Select Wired Connection if your PS3 is connected via ethernet, or Wireless if you use Wi-Fi.

Step 6– If connected via ethernet, select Auto-Detect for the operation mode.

If connected via Wi-Fi, Under the WLAN section, select Enter Manually and Press right on the d-pad to select IP Address Setting.

Step 7- Now, choose Automatic for the IP Address Setting

Step 8- Then, choose Do Not Set for the DHCP hostname.

Step 9- Then, select Automatic for the DNS Setting.

Step 10- Choose Automatic for MTU.

Step 11- Select Do Not Use for the Proxy Server.

Step 12- Choose Enable for UPnP.

Step 13- Save these settings by pressing the X button.

Step 14- Finally, select your Test Connection.

How to verify your DNS settings on PlayStation 4:


Fix Netflix NW-2-5 Error Code
PlayStation 4

Step 1- On your PlayStation 4, navigate to Settings.

Step 2- Here, go to Network Settings and select Set Up Internet Connection.

Step 3- Choose Use Wi-Fi if you are connected wirelessly, or Use a LAN Cable if you are connected via an ethernet cable.

If you are connected via Wi-Fi, search for Use Wi-Fi, and select Custom and then select your Wi-Fi network.

If you are connected via ethernet, select Custom for the Operation mode.

Step 4- Choose Automatic for the IP Address Settings.

Step 5- Choose Do Not Specify for the DHCP Host Name.

Step 6- Choose Automatic for the DNS Settings.

Step 7- Choose Automatic for the MTU Settings.

Step 8- Choose Do Not Use for the Proxy Server.

Step 9- Choose Test Connection.

Also Read: How To Watch Netflix for Free in Quarantine

How to verify your DNS settings on an Xbox 360:


Top 5 Xbox One Emulators for Windows PC, MAC 2018
Xbox One Emulators for Windows PC, MAC

Step 1- Press the Guide button on your controller.

Step 2- Navigate to Settings >> System Settings.

Step 3- Select Network Settings.

Step 4- Locate your network and select Configure Network.

Step 5- Select DNS Settings >> Automatic.

Step 6- Shut down your Xbox 360 and then turn it back on.

Step 7- Check whether your Netflix nw-2-5 Error Code has been solved.

Also Read: How To Fix WiFi Connected But No Internet Access?

How to verify your DNS settings on an Xbox One:


Step 1- Press the Menu button and select Settings >> All Settings.

Step 2- Select Network.

Step 3- Then, select Network settings.

Step 4- Now, select Advanced settings.

Step 5- Then, click on DNS settings.

Step 6- Now, select Automatic.

Step 7- Finally, press the B button.

Step 8- Check whether your Netflix nw-2-5 Error Code has been solved.

Also Read: Win32 Priority Separation in Windows 10

Conclusion:

These are the various methods that you can use to Fix Netflix nw-2-5 Error Code on your streaming device. We have also provided the steps involved in each of the methods. You can start with the first method and keep executing the following methods until the Netflix NW-2-5 Error Code is resolved. If you have any queries regarding this topic, then please let us know about it in the comments section below.

Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.